#

Forum Extends Uranium Mineralization for 200 Metres at Tatiggaq, Thelon Basin Project

Forum Energy Metals Corp. (TSXV: FMC) (OTCQB: FDCFF) (‘Forum’ or the ‘Company’) announces assay results extending uranium mineralization for 200 metres to the southwest on the Tatiggaq zone at its Thelon Basin uranium project located 100 km west of the Hamlet of Baker Lake, Nunavut. Forum holds a 100% interest in 95,500 hectares of ground adjacent to Orano’s 133 million pound Kiggavik uranium project*. Forum has received assay results from a second drill hole on the Tatiggaq zone, located five kilometres west of Orano’s 93 million pound Andrew Lake and End uranium deposits (Figure1).

HIGHLIGHTS

TAT23-003 intersects high-grade uranium mineralization in a 200 m step out from TAT23-001/002 (see news release dated September 12, 2023)TAT23-003 (West Zone) intersects 0.40% U3O8 over 12.8 m (136.0 – 148.8 m)

including1.10% U3O8 over 0.8 m (136.0 – 136.8 m)
including1.08% U3O8over 1.3 m (143.8 – 145.1 m)

Entire mineralized zone is 0.28% U3O8 over 24.6 m (129.5 – 154.1 m) in what is interpreted as multiple uranium lenses within a wide fault zone.

Dr. Rebecca Hunter, Forum’s VP, Exploration stated, ‘Forum’s latest Tatiggaq drill result 200 metres southwest of our first hole of the program shows the significant strike length and uranium mineralization potential of the Tatiggaq deposit. The main takeaway from this hole is the widths and grades intersected at the West zone demonstrate continuity along strike. The mineralization is open along strike to both the southwest and northeast towards Tatiggaq Main. Our drilling continues to demonstrate that the Tatiggaq area could host a major basement-hosted unconformity deposit.’

Tatiggaq

Figure 1 shows the main east-northeast structures (Thelon and Judge Sissons faults) as well as the numerous, sub-parallel subsidiary east-northeast structures interpreted to control uranium mineralization on Orano’s and Forum’s property. Figure 2 is a plan map of the Tatiggaq gravity anomaly and drill area.

TAT23-003 was designed to target the Tatiggaq West zone to infill and extend the mineralization identified from the widely spaced historical drill holes. This hole confirmed the presence of steep-dipping, high-grade sub-parallel uranium lenses present over 200 m along trend of the Tatiggaq Main mineralization. The full intercept has a significant thickness of 24.6 metres. This single test hole requires additional drilling to the northwest and southeast to fully determine the full extent of the uranium mineralization.

TAT23-003 (West Zone) intersected 0.40% U3O8 over 12.8 m (136.0 – 148.8 m) including:

1.10% U3O8 over 0.8 m (136.0 – 136.8 m), and
1.08% U3O8over 1.3 m (143.8 – 145.1 m)

Figure 3 shows drill core from the TAT23-003 mineralized section. The uranium mineralization is present along steep-dipping fracture and breccia zones in distinct high-grade lenses and is hosted within alternating reduced gray sulphide-altered zones and oxidized hematite-altered zones.

Tatiggaq Interpretation

Mineralization within the Tatiggaq deposit consists of two zones – the Main and West Zones and is located at depths between 80 and 180 m. The mineralization is hosted in a series of high-grade subparallel, steep, south-dipping fault zones that sit within a 50 m wide area. Individual high-grade mineralized structures are up to 10 m in width. The strike extent of the Main Zone is at least 60 m but is open to the northeast and the West Zone is now 150 m in strike length and is open to the southwest. Further delineation is required between the two zones to determine if they are connected. In addition, the entire 0.7 km wide by 1.5 km long Tatiggaq gravity anomaly remains open for additional uranium mineralization both along strike of the known zones but also along numerous sub-parallel fault zones to the north and south of the main Tatiggaq trend. Table 1 and Table 2 show the drill and assay data respectively.

Table 1 2023 Drill Hole Data. UTM collar coordinates are in datum WGS84 Zn 14N.

Hole IDTargetEastingNorthingDepthDip/AzimuthTAT23-001Tattigaq5489197135454234-75° / 310°TAT23-002Tattigaq5489197135454176-72° / 325°TAT23-003Tattigaq West5487577135335206-64° / 310°TAT23-004Tattigaq West5488177135349210-64° / 310°NED23-001Ned5554807146319165-80° / 310°

Table 2 – U3O8 assay results for TUR23-003 using a 0.01% cutoff.

Hole IDU3O8_%Interval_mFrom_mTo_mEntire IntervalTAT23-0030.2824.6129.5154.1Subdivided Into Lenses
0.362.3129.5131.8waste interval2.0131.8133.8
0.111.2133.8135.0waste interval1.0135.0136.0
0.4012.8136.0148.8including1.100.8136.0136.8including1.081.3143.8145.1waste interval1.4148.8150.2
0.163.9150.2154.1including1.040.1152.9153.0

*Source: Areva Resources Canada Inc., The Kiggavik Project, Project Proposal, November 2008 and Kiggavik Popular Summary, April, 2012 submission to the Nunavut Impact Review Board.

Quality Assurance/Quality Control

Geochemical analysis was conducted at the Saskatchewan Research Council Geoanalytical Laboratory in Saskatoon, Saskatchewan. Systematic 10 cm split (basement) and 10 m chip composite samples (sandstone) were analysed using ICP-MS Exploration Package for sandstone and basement rocks (ICP-MS1 and 2). Assay samples were analysed using the ICP-OES package (ICP1) with the addition of the U3O8 wt% assay analysis. Mineralized samples were split into half core samples ranging from 10 to 50 cm in thickness except shoulder regions were locally up to 90 cm and all samples were grouped based on similar radioactivity using a hand-held scintillometer. Duplicates were taken every 20 m and were within acceptable limits for field rock samples.

Rebecca Hunter, PhD., P.Geo., Forum’s Vice President of Exploration and Qualified Person under National Instrument 43-101, has reviewed and approved the contents of this news release.

Figure 1 The Thelon Basin is a geologic analogue to the Athabasca Basin in Saskatchewan. Orano’s uranium deposits are along the same controlling structures as Forum’s Tatiggaq deposit and over 20 other targets are present within the project, which could host additional uranium deposits similar to the Athabasca Basin.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4908/181870_136b331ee4133838_003full.jpg

Figure 2 The Tatiggaq gravity anomaly showing the location of the Tatiggaq West and Main zones, historical drilling and the 2023 drill holes. Several of the historical drill holes have anomalous uranium values that require follow-up drilling. Inset Map: close-up of 2023 drilling.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4908/181870_136b331ee4133838_004full.jpg

Figure 3 TAT23-003 drill core from the mineralized section (135.3 to 155.9 m). Scintillometer readings are written on the core boxes in counts per second and were measured using a digital, hand-held CT-007M scintillometer by Environmental Instruments Canada Inc.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4908/181870_136b331ee4133838_005full.jpg

About Forum Energy Metals

Forum Energy Metals Corp. (TSXV: FMC) (OTCQB: FDCFF) is focused on uranium exploration in Canada. Forum holds interests in 76,421 hectares in the Athabasca Basin, Saskatchewan and 95,519 hectares in the Thelon Basin, Nunavut, a geologic analogue to the Athabasca for high grade, unconformity-related uranium deposits. In addition, Forum holds a strategic portfolio of energy metal projects – copper, nickel, PGM, zinc and cobalt in Saskatchewan and Idaho.

For further information: https://www.forumenergymetals.com.

This press release contains forward-looking statements. Forward-looking statements address future events and conditions and therefore involve inherent risks and uncertainties. Actual results may differ materially from those currently anticipated in such statements. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause Forum’s actual results, level of activity, performance or achievements to be materially different from those expressed or implied by such forward-looking information. Such factors include but are not limited to: uncertainties related to the historical data, the work expenditure commitments; the ability to raise sufficient capital to fund future exploration or development programs; changes in economic conditions or financial markets; changes commodity prices, litigation, legislative, environmental and other judicial, regulatory, political and competitive developments; technological or operational difficulties or an inability to obtain permits required in connection with maintaining or advancing its exploration projects.

ON BEHALF OF THE BOARD OF DIRECTORS

Richard J. Mazur, P.Geo.
President & CEO

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

For further information contact:

Rick Mazur, P.Geo., President & CEO
mazur@forumenergymetals.com
Tel: 604-630-1585

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/181870

News Provided by Newsfile via QuoteMedia

This post appeared first on investingnews.com